Download - transmitters and transducers
Configuration program for transmitters and transducers
TSensor - Configuration program for temperature-humidity-pressure transmitters with analog, serial or Ethernet outputs (Txxxx range) (1,4 MB, ver. 2.1.6.2). You need also special communication cable for analog output transmitters (SP003), and USB port driver for this cable. Driver is automatically installed during program setup on Windows 2000 and Windows XP systems. Driver for Windows 98, Windows ME has to be installed separately (see link USB adapter driver above on this page). No special communication cable and USB driver are required for transducers with serial RS232, RS485 or Ethernet outputs.
Data read and store utility
SensorReader (0,9 MB) - Simple utility for monitoring and storing data from one serial or ethernet transducer (models Txxxx, Pxxxx), ver. 1.0.2.2.
USB cable driver
USB cable driver (355kB) - driver for USB communication cable for transmitters Txxx (driver is installed automatically when you install TSensor program on machine with Windows 2000 or higher so there is no need to download driver separately). Unzip downloaded file to diskette or harddisk folder and plug USB cable into computer's USB port. Windows try to find appropriate driver - enter where unzipped files are placed(diskette or disk folder). Folder with files can be erased after installation and computer should be restarted. Detailed instructions for Windows 2000, Windows XP (PDF 476kB), for Windows 98, Windows ME (PDF 442kB)
MIB tables
If you want to use SNMP protocol with LAN adapter, download MIB tables (21 kB).
Firmware
Current version of firmware (1-5-1.00 24.7.2007) and www pages for Tx5xx transmitters: Tx5xx.zip (178 kB).Current version of firmware (4-5-1.04 3.10.2007) and www pages for P85xx transmitters: P85xx.zip (70 kB)