with Built-in Printer
Thermometer - data logger T-Print2
Data logger T-PRINT is designed for data logging of temperature from one external probe into its internal memory. Data logger T-PRINT-2 logs temperature from two external probes. Any time it is possible to print out the record on the built-in needle printer. The result is a hardcopy of temperature record on the strip of paper of 58mm width. Format is numerical with date, time place of measurement (vehicle, cold store). It is possible to repeat the print-out from the last stored temperature to the past until a button is pressed to stop printing. Consequently it is easily possible to print out a hard copy of transport condition to every client.
It is also possible to transfer logged data into a PC to analyze and print out temperature in numerical and graphic format. The PC software enables to erase datalogger memory, set sampling interval, set internal real time clock. It also enables to enter the place of measurement (vehicle) to print-out heading. After datalogger memory is full, datalogging continues and the oldest stored values are cyclically being replaced by the newest. The T-PRINT datalogger memory is fulfilled in 40 days of continuous record with sampling interval of 5 minute or 4 months with 15 minute sampling interval. Memory fulfilling times of dual channel datalogger T-PRINT-2 are 20 days/5minute interval and 2 months/15 minute interval.
Datalogger is designed for installation at driver´s cabin. Connected temperature probes are
located in chilled or frozen space. Anytime it is possible to print out the record.
Low cost operation is the advantage. Needle printer requires only usual paper in 58mm
rolls of 30 meters length. One roll of the paper enables to print out 9000 lines of record.
Life of ribbon cassette enables to print out 3 rolls of paper.
Main thermometer applications:
- Transport of food or pharmaceuticals - tested by accredited laboratory in accordance with the European standard EN 12830 - Temperature recorders for transport, storage and distribution of chilled, frozen food.
- Food and beverage industry (HACCP)
- Pharmaceutical industry
- Laboratories (GLP)
- Warehouses
- Technological processes
- Museums, archives, galleries
| TECHNICAL PARAMETERS | |
|---|---|
| Measuring temperature range: | -50 to +250°C |
| Operating temperature range: | -30 to +65°C |
| Operating temperature range of the printer: | -20 to +65°C |
| Temperature sensor type: | RTD Ni1000, 6180ppm/°C |
| Connector for temperature probe connection: | Cinch |
| Accuracy of the input without probes: |
±0.2°C from -50 to +100°C ±0.2% from reading from +100 to +250°C |
| Resolution: | 0.1°C |
| Sampling interval : | 1 minute to 24 hours, user adjustable |
| Memory capacity: | 12192 values at maximum |
| Power: |
9 to 32V dc, protected against alternator load shedding + internal Lithium battery 3.6V, minimum life 5 years - internal clock back-up |
| Current consumption during printing: | peak 2 A |
| Current consumption - not printing: | approximately 50 mA |
| Dimensions (H x W x D): | 180 x 123 x 66 mm |
| Weight: | approximately 600 g |
| Protection: | IP20 |
| Warranty: | 2 years |
It is necessary to order temperature probes with the Ni1000/6180ppm sensor. Recommended is the multi purpose watertight probe N1ATG8U/C on the cable with a Cinch connector. Range of the probe -30 to +80°C. Please specify required cable length 5,10 or 15 meters.
Thermometer Accessories
Traceable calibration certificate from the manufacturer, instruction manual.
Calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Example of calibration certificate.
Included is also PC cable, internal
Lithium battery 3.6V for supplying the internal clock, ribbon cassette, roll of paper,
self adhesive Dual Lock for easy installation.
Anytime it is possible to download free basic Windows program for data logger. Program enables to control all logger functions and viewing and printing of record in numerical and simple graphic format. It is possible to export logged values to dbf or txt formats for further analysis.
| OPTIONAL ACCESSORIES | ||
|---|---|---|
|
SW100 | CD with free PC program for thermometer |
|
MP006 | RS232/USB converter for communication with the PC via USB port |
|
PR002 | spare roll of paper for printer, width 58mm, length 30m, 9000 lines of record |
| DPN-290BL | spare ribbon cassette for printer, life - 3 printed out rolls of paper | |
|
A1536 | acdc adapter 230V-50Hz/12Vdc/500mA. |
|
A4203 | spare Lithium battery 3.6V size AA |
|
K2210 | spare male connector Cinch for connecting the temperature probe |
|
SWR004 | optional Windows software for thermometer - color printing, vertical and horizontal zooming of graphs and other functions. |
 
|
probes | temperature probes for data logger with RTD Ni1000/6180ppm sensors equipped with male Cinch connectors - there is a symbol /C behind probe name. |
Opened data logger T-Print
Thermometer manual in pdf format