Ethernet thermometer T0510 is designed for ambient temperature measurement. Transducer T4511 is designed for conversion of temperature signal from external probes with Pt1000/3850 sensor (not included) to Ethernet interface. Degrees Celsius and Fahrenheit are user selectable. Ethernet sensor is built in a durable plastic case. Large dual line LCD is an advantage. Display is possible to switch off.
APPLICATIONS - measuring and control of temperature at:
- server rooms
- telecommunication devices
- warehouses
- glasshouses
- manufacturers
- museums, archives, galleries
- air-conditioned rooms
- weather stations
There are the following options of alarm indication:
ALARM INDICATION OPTIONS | |
---|---|
E-mail: | In case of alarm creation warning e-mail message is sent to addresses defined by the user (maximum three addresses). |
SNMP: | In case of exceeding of adjusted temperature limits alarm is activated and warning trap is sent to user specified IP addresses (maximum 3 addresses). |
WWW pages: | In case of exceeding of adjusted temperature limits active alarm is displayed on www page. |
syslog: | Transmitter enables to send text messages to selected syslog server after different events appear. E.g. after transmitter restart, alarm activation, communication error with SNTP, write to transmitter via mdb, sntp, after firmware change, after alarm termination, after communication error with SOAP server. |
TECHNICAL PARAMETERS | |
---|---|
Available temperature units: | degrees Celsius, Fahrenheit |
T0510 thermometer measuring range: | -30 to +80°C |
Accuracy of T0510 thermometer: | ±0.6°C |
Measuring range of T4511 transducer: | -200 to +600°C |
Accuracy of T4511 transducer input without probes: | ±0.2°C |
Temperature operating range of case with electronics: | -30 to +80°C |
Temperature operating range of LCD display: | readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C |
Protection of the case with electronics: | IP20 electronics |
LAN connection: | RJ-45 connector |
Power: | 9-30Vdc, maximum consumption 1W |
Power connector: | co-axial, diameter 5 x 2.1 mm |
Dimensions of the T0510 case: | 88 x 126 x 37 mm (W x H x D) |
Dimensions of the T4511 case: | 88 x 98 x 37 mm (W x H x D) |
Warranty: | two years |
Included accessory:
Traceable calibration certificate from the manufacturer, instruction manual.
Calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Example of calibration certificate.
Free program TSensor for configuring of the transmitter is ready to download.
Free program SensorReader for logging values from one thermometer to a PC disk file is ready to download. Recorded values in CSV format are easy to process in e.g. Excel.
For acquiring values from several transmitters, third party software is necessary to use. Tested functionality is with programs
TIRS.NET,
ControlWeb,
EasyView. For record of values to graphs via web interface, project Cacti
www.cacti.net
is available.
OPTIONAL ACCESSORY | ||
---|---|---|
|
probes | temperature probes with Pt1000/3850ppm sensor without connector - probe marking is followed by symbol /0. Recommended is multi-purpose watertight probe Pt1000TG8/0 available with cable lengths 1, 2, 5, 10m |
MD036 | self adhesive Dual Lock for easy installation | |
A1515 | adapter 230V-50Hz/12Vdc |